Crankbait and Fishing Plug Parts

CONNECTING LINKS 25PK

Connecting links are used as connectors on crankbaits. Nickel plated, strong, top quality connecting links.

Order #: 335505

CRANKBAIT BELLY WEIGHTS

Our crankbait belly weights are used to tune crankbait performance and as hook hangers. The weights consist of a stainless steel wire eye with a small amount of lead molded on. Available in 4 sizes.

Order #: 360127

* Quantity discount available, buy more and save!

CUP WASHERS 100PK

Cup washers are used on the end of your plugs and topwater fishing lures between plug body, propellers and screw eyes for a bearing surface. Cup washers have a nickel finish.

Order #: 312323

DISC WASHERS SIZE 7/32"

Disc washers are small plated washers that are used on the end of your fishing lure plugs between the body, propellers and screw eyes for a bearing surface. Nickel finish.

Order #: 320904

Availability:

In Stock

$7.99 / 100 pack

* Quantity discount available, buy more and save!

FIGURE 8 LINKS

Figure 8 links are used to connect jointed plug bodies and can be a substitute for split rings. Nickel plated steel.

Order #: 310311

FISHING LURE SCREW EYES 25 PACK

Screweyes for making your own fishing lures. Made of brass and then plated heavily with nickel to prevent corrosion. If you do not see the size you need, please check order # 307932 Stainless Steel Screw Eyes.

Order #: 307930

FISHING LURE STAINLESS STEEL SCREW EYES 25PK

Stainless steel screw eyes for lure making

Stainless steel screw eyes are preferred by musky and pike fishermen for their extra strength. Screw eyes are available in open and closed eye.

Order #: 307932

HOOK HANGER 25 PACK

Hook hangers are used to attach treble hooks to wooden fishing lures. Hook hangers reduce hook fouling by reducing treble hook swing. Nickel plated brass. Size 3 is made of heavier gauge nickel plated brass with a larger screw hole than the other two sizes. All of our hook hangers require 2 of our mounting screws.

Order #: 312325

SCREW EYE ASSORTMENT 250 PIECES

Assorted sizes of open and closed screw eyes. Includes nickel plated brass and stainless steel screw eyes. Approximately 250 pieces.

Order #: 307933

Availability:

Backorderable

$9.99 / EACH

SCREW EYE BASE

The screweye base reduces hook swing reducing tangles and protecting the lure finish. Use when constructing new wood lures and when restoring old wooden fishing lures. Use with our screweyes 1/2" and longer. Nickel plated brass.

Order #: 371520

Availability:

In Stock

$1.89 / 25 pack

* Quantity discount available, buy more and save!

STAINLESS STEEL ANNEALED LINE TIE

Annealed stainless steel wire eyes for fishing lures

Annealed stainless steel wire eyes can be used with wooden body baits as a line tie or rear hook hanger. Wire eye can be glued into the body or used with a crankbait bill. Annealed stainless steel wire allows easy tuning. Line tie is made of .040" wire and has a length of 1-3/8". Use slow cure epoxy for best results.

Order #: 356200

Availability:

In Stock

$2.69 / 50 pack

* Quantity discount available, buy more and save!

BAIT MAKERS KIT

The Netcraft Bait Makers Kit has just what you need to get started making wooden crankbaits(plugs) or repairing old favorites. The Bait Makers Kit includes over 520 pieces including cup washers, hook hangers, lure lips, propeller blades, screw eyes, mounting screws and split rings. The Bait Makers Kit is packaged in a handy 6 compartment storage box. Plug assembly instructions are included. Perfect for beginners or seasoned lure builders.

Order #: 310995

Availability:

In Stock

$32.59 / EACH

Plug Parts - Hook Hangers, Cup Washers, Screweye Base, Disc Washers, Figure 8 Links

Fishing Lure Plug Parts

Fishing Lure Plug Parts

Notify Me

Email A Friend

Join Our Email Lists