Weed Guards, Fiber Guards
Do-It Molds >> Weed Guards, Fiber Guards

Fiber weed guards are made of individual nylon strands that are molded together at the base. Fiber guards are supplied extra long to fit almost any lure or jig. The weed guard is usually trimmed after molding to fit an individual lure or jig by cutting the end of the fiber guard with scissors. Fiber weed guards are made with several base diameters to vary the stiffness of the weed guard. Strand diameter of the weed guard also affects the stiffness of the fiber guard. Each Do-It mold specifies the type of fiber guard it will accept and only those fiber guards with the same base diameter will fit in that mold.

Fiberguards can be molded directly into the jig head when it is cast or glued in later. Gluing the weed guard in later makes painting the jig head easier.

HEAT RESISTANT FIBERGUARD TUBING
Fiberguard Tubing
Heat resistant fiberguard tubing slips over jig fiberguards and protects the fiberguard from heat during the powder paint curing process. 5 tubes per pack, reusable.
Catalog # 410535
In Stock
$6.75 / EACH Email A Friend
1/8" BASE MEDIUM STIFFNESS FIBER WEED GUARDS TYPE B
Fiber Weed Guards FG30, FG30B
Fiber weed guards can be cast directly into the jig head or glued into the jig after it is dressed. All fibers in the weed guard are straight and cleanly cut to increase your pouring speed. These fiberguards match the Do-it FG-30 and FG-30B Model weedguards.
Catalog # 345905
In Stock
Select Sizes & Colors
1/8" BASE STIFF FIBER WEED GUARDS TYPE B
Fiber Weed Guards FG30HB
These fiber weed guards have stiffer fibers than our 345905 weed guards. These weed guards have a 1/8 inch diameter base and can be cast directly into the jig head or glued into the jig after it is dressed. All fibers in the weed guard are straight and cleanly cut to increase your pouring speed. These weed guards match the Do-it FG-30HB model weedguards.
Catalog # 345906
In Stock
Select Sizes & Colors
5/32" BASE LARGE FIBER WEED GUARDS TYPE E
Fiber Weed Guards, FG40B
Fiber weed guards can be cast directly into the jig head or glued into the jig after it is dressed. All fibers in the weed guard are straight and cleanly cut to increase your pouring speed. For use in the Do-It BBJ-3-LF jig mold. These fiberguards match the Do-it FG-40B Model Weedguards.
Catalog # 345910
In Stock
$7.39 / 100 pack Email A Friend
5/64" BASE LIGHT STIFFNESS CLEAR FIBER WEED GUARDS TYPE C
Fiber Weed Guards FG12
Clear fiber weed guards (Style C) are made to use in the RVB-5-AF weedless round head jig molds. These match the Do-it FG-12 Model fiberguards. 1.375" length, 12 strands of light stiffness material.
Catalog # 345912
Out of Stock
$4.75 / 100 pack Email A Friend
5/64" BASE MEDIUM STIFFNESS FIBER WEED GUARDS TYPE D
Fiber Weed Guards FG12HB
These fiber weed guards are a bit stiffer than our 345912 (FG-12HB) fiberguard. Straight, cleanly cut strands are sure to increase your pouring speed. Made for use in th Do-It RVB-5-AF weedless roundhead jig mold. These match the Do-it FG-12HB Model fiberguards. 1.375 inch length, 7 strands.
Catalog # 345913
In Stock
Select Sizes & Colors
1/16" BASE SMALL CLEAR FIBER WEED GUARDS TYPE A
Fiber Weed Guards, FG9
Clear fiber weed guards (Style A) are used in all cavities of the Do-It RVB-6-1632F jig mold. The RVB-5-AF jig mold uses these fiberguards in it's 1/32 and 1/16 oz. cavities. These fiber weed guards match the Do-it FG-9 model weedguards. 7/8" length, 8 strands.
Catalog # 345911
In Stock
$5.49 / 100 pack Email A Friend