Cork Rear, Fore Grips

26 items       Page 1 of 4



11" CORK REARGRIP TAPERED WITH INTEGRAL BUTT CAP
11" CORK REARGRIP TAPERED WITH INTEGRAL BUTT CAP
Shaped cork rear grip for fishing rods with a built in rubberized butt cap. Tapered shape, 1-1/8" OD, 3/8" ID, 11" length.
Order #: 250716

Availability:   
In Stock
$11.99 / EACH
6.25" STRAIGHT CORK REARGRIP WITH INTEGRAL BUTTCAP
6.25" STRAIGHT CORK REARGRIP WITH INTEGRAL BUTTCAP
Shaped cork rear grip for fishing rods with a built in rubberized butt cap. Straight grip shape, 1-1/16" OD, 1/4 inch ID, 6-1/4 inch length.
Order #: 250714

Availability:   
In Stock
$6.99 / EACH
CORK FOREGRIPS 2" LENGTH
CORK FOREGRIPS 2" LENGTH
Netcraft shaped cork foregrip reduces the time required to assemble a cork fishing rod handle. 2" length, .250" I.D., 1" O.D..
Order #: 250711

Availability:   
In Stock
$2.59 / EACH
CORK FOREGRIPS 3" LENGTH
CORK FOREGRIPS 3" LENGTH
Netcraft shaped cork foregrip reduces the time required to assemble a cork fishing rod handle. 3" length, .375" I.D., 1-1/8" O.D..
Order #: 250712

Availability:   
In Stock
$3.75 / EACH
CORK PISTOL GRIPS 4-3/4" LENGTH
CORK PISTOL GRIPS 4-3/4" LENGTH
Our pistol grip is made with select grade cork. 4.7" length, 5/16" inside diameter. End is contoured to fit our trigger reel seats.
Order #: 250520

Availability:   
Currently Not Available
$14.99 / EACH
CORK REAR GRIPS 10" LENGTH, 5/16"ID
CORK REAR GRIPS 10" LENGTH, 5/16"ID
This 10" cork rear grip can be used to build or repair both spinning and casting rods. One end is recessed to accept any of our 3/4" I.D. tapered buttcaps. Minimal sanding is required to fit the grip to a reel seat. 10" length, 5/16" inside diameter, 1-1/16" outside diameter.
Order #: 250722

Availability:   
In Stock
$12.19 / EACH
CORK REAR GRIPS 12" LENGTH 3/8" ID
CORK REAR GRIPS 12" LENGTH 3/8" ID
Our regular grade cork rear grips are used to make both casting and spinning rod handles. The 12" length can be easily shortened if you choose by cutting along a glue line. One end is recessed to accept our 280703 tapered buttcaps. Minimal sanding is required to fit a graphite reel seat. 12" length, 3/8" inside diameter, 1-1/16" outside diameter.
Order #: 250737

Availability:   
Out of Stock
$13.09 / EACH
CORK REAR GRIPS 7" LENGTH 1/4"ID
CORK REAR GRIPS 7" LENGTH  1/4"ID
Our 7" cork rear grip has a recessed end to accept our 280703 tapered butt cap. Minimal sanding is required to fit a reel seat. 7" length, 1/4" inside diameter, 1-1/16" outside diameter.
Order #: 250720

Availability:   
In Stock
$8.29 / EACH