Rod Wrapping Tools, Equipment

FLEXCOAT EPOXY BRUSH CLEANER For cleaning liquid Flexcoat from your expensive brushes. Safer and milder than low flash point solvents. 4 oz. bottle. Catalog # 290510 $3.49 / EACH CORK RING CLAMP The cork ring clamp is designed to compress cork rings and hold them together until glue dries to eliminate gaps between cork rings. 24 inch clamp length. Catalog # 290603 $17.39 / EACH BURNISHING TOOL Thread burnishing tool helps you smooth and flatten thread wraps on guides and butt wraps without fraying the thread. Thread burnishing tool is made of smooth plastic. Catalog # 240702 $2.65 / EACH MASKING TAPE Narrow 1/4 inch wide masking tape has many uses in rod building. 36 yard roll. Special adhesive leaves no residue on blank after it is removed. Catalog # 255272 $12.39 / EACH CORK REAMER SET Hand reamers remove cork from the inside of handles and rings quickly and easily. Set includes 4 reamers with diameters starting at 1/4" and progressing up to 1/2". 14" length. Catalog # 255500 $21.95 / EACH REAMER GRIT Use our reamer grit to make your own custom cork ring and handle hand reamers. Use our 2 part epoxy to glue the grit to wood dowels or scrap pieces rod blanks. Grit comes in a 4 oz. pack which will make plenty of tools. Catalog # 255501 $2.59 / EACH ABRASIVE REAMER TAPE Use our reamer tape to make your own cork reaming tools. Abrasive reamer tape comes in a 1/2 inch wide x 3 foot length. Reamer tape attaches easily to old rod blanks with contact cement. For best results, leave 1/4 inch gap between wraps. Catalog # 255502 $2.49 / 3ft roll