-
|
CORK BUSHING 5"
|
|
Cork bushings are made to fit our Tennessee graphite handles with an O.D. of .874". Cut the cork bushing apart to form ends and bushings. .250" I.D..
Order #: 250739
|
|
|
|
-
|
BULK WOVEN GRAPHITE TUBING
|
|
Use this woven graphite tubing to make your own lightweight graphite handles. 30" length, .970" O.D..
Order #: 230105
|
|
|
|
-
|
ERIE REAR GRIPS
|
|
Our Erie rear grips are shaped from EVA foam and cork composite rings. These grips add custom rod appeal to both spinning and casting rods. All 3 lengths have 1/2" inside diameters and 1-1/8" Outside diameters. They match our Erie fore grips.
Order #: 245129
|
|
|
|
-
|
ERIE FORE GRIPS
|
|
Our Erie fore grips are shaped from EVA foam and cork composite rings. These grips add custom rod appeal to both spinning and casting rods. They match our Erie Rear grips.
Order #: 245130
|
|
|
|
-
|
SAGINAW HANDLE SET 5"X10-1/8"
|
|
Our Saginaw handle sets combine the durability of dense EVA foam with the beauty of cork composite inlays. The craftsmanship is truly impressive and any fisherman would appreciate these beautiful grips. Sets are tapered to provide a comfortable grip. Fore Grip Dimensions - Length - 5", I.D. - 7/16", O.D. - 1-3/16". Rear Grip Dimensions - Length - 10-1/8", I.D. - 7/16", O.D. - 1-3/16".
Order #: 245135
|
Availability:
|
Currently Not Available
|
|
|
|
|
-
|
SAGINAW HANDLE SET 6"X13"
|
|
Our Saginaw handle sets combine the durability of dense EVA foam with the beauty of cork composite inlays. The craftsmanship is truly impressive and any fisherman would appreciate these beautiful grips. Sets are tapered to provide a comfortable grip. Fore Grip Dimensions - Length - 6", I.D. - 7/16", O.D. - 1-3/16". Rear Grip Dimensions - Length - 13", I.D. - 7/16", O.D. - 1-3/16".
Order #: 245136
|
Availability:
|
Currently Not Available
|
|
|
|
|
-
|
CORK TAPE
|
|
Cork tape is handy for building and replacing rod handles on fishing rods. Cork tape can also be used in place of masking tape for building reel seat arbors. Available in a 1 inch wide x 24 inch roll or a bulk roll measuring 1 inch x 100 feet.
Order #: 255274
|
|
|
|
-
|
FLOCKED HEAT SHRINK TUBING GRIP MATERIAL
|
|
Flocked heat shrink grip material can be slid directly over the rod blank butt to create a grip. Tubing shrinks up to 30% when heated. Tubing is available in I'D's. 39" length.
Order #: 273505
|
|
|
|