There are many high quality rod wrapping finishes available to the custom rod builder in one and two part formulas. The two part rod finishes are more popular with custom rod builders. Excellent 2 part formulas are available from Flexcoat, Trondak and Rodsmith. Some rod builders use a high build formula which only requires one coat application while others choose a light formula that requires multiple thin coats. Whether you choose high build or light formula, remember the most important part of using a two-part rod finish is mixing the finish correctly. Use the mixing syringes supplied with the rod finish to accurately measure equal parts of the resin and hardener. Rod finishes mixed incorrectly will never cure and remain tacky to the touch. Improperly cured rod finish will cause you to apply another coat of finish or cut off the guide wraps and start over.
One part rod finishes are chosen by rod builders for their ease of use, thin build up and history. Gudebrod and Trondak both manufacture one part rod finishes. One prt rod finishes are most often used in rod repair and rod renovation. All rod finishes are self-leveling and require turning while being applied and drying for best results.
|
|
