Fish Net Making
18 items Page 1 of 3
Net Making Supplies >> Net Making, Repair Parts
Find everything you need to make your own fishing nets, plus a full selection of net making tools and material for repairing damaged fishing nets.
-
|
BRASS SWIVEL
|
|
Size 12/0 brass crane swivel is the proper size and style for cast nets. Swivel is about 2.5 inches long. Approximate test is 1500 lbs.
Order #: 971210
|
|
|
|
-
|
GENUINE ANTIQUE CEDAR NET FLOATS 5 IN X 1 3/4 IN
|
|
Genuine cedar net floats salvaged from old working fish nets. cedar net floats are perfect for decorating. Each net float measures 5 Inches long X 1-3/4 inch diameter. 3/8 inch ID.
Order #: 935130
|
|
|
|
-
|
NET CLOSING RINGS
|
|
Large 5/8" diameter split ring can be used to close the bottom of flat netting forming a net bag. These split rings are made of corrosion resistant brass. 6 per pack.
Order #: 971204
|
|
|
|
-
|
HINGED STEEL RINGS
|
|
Hinged steel rings give you an easy way to control net meshes while making your own nets. Set includes 3 rings, 1 each of 1", 1-1/2" and 2".
Order #: 971205
|
|
|
|
-
|
HAMMOCK RING
|
|
Hammock rings are galvanized steel rings with a 2 inch diameter. Sold per pair.
Order #: 971206
|
|
|
|
-
|
NET WEIGHTS
|
|
Lead weights for minnow seines and cast nets have a 1/4" hole through the center for bottom net line. Lead weights are preferred over steel weights found on cheaper nets because they perform better. 16 weights per pack. about 1 oz. each, 1 pound per pack. Limit 5 packs per order.
Order #: 971215
|
|
|
|
-
|
DELRIN SAIL THIMBLE
|
|
Derlin sail thimble is used to anchor the web of your cast net. Cast net lead lines pull through the smooth center of the sail thimble. 3/4" I.D., 1-1/2" O.D..
Order #: 971216
|
|
|
|
-
|
NET SHUTTLE SET
|
|
Shuttles are a required tool for net making and net repair. Shuttles are used to store and dispense the twine as it is woven through the net and knots are tied. Shuttle size is determined by the size of twine you are using and the mesh size of your net. Set includes 8 different sizes of shuttles capable of a minimum 1/2" mesh up to a 4" turtle trap mesh.
Order #: 971900
|
|
|
|
|
|