Lee Lead Melting Furnaces

12 items       Page 1 of 2


Lee precision lead melting pots are built in the U.S.A. with pride.


  • LEE PRODUCTION POT IV MELTER
    LEE PRODUCTION POT IV MELTER
    Lee Production Pot IV lead melter features lever control of the up front spout allowing the right amount of lead to enter the mold on every pour. Adjustable thermostat permits keeping the lead at the proper temperature. Dust tight housing extends thermostat life. Lead melt time is less than 20 minutes. The Lee production pot IV has 4" of clearance, enough to accept both Do-It and Hilts molds. Production pot holds up to 10 lb. of lead. 110 volts, 500 watts. 2 year factory warranty.
    Order #: 410500

    Availability:   
    In Stock
    $59.99 / EACH
  • LEE PRO 4-20 MELTER
    LEE PRO 4-20 MELTER
    The Lee Pro 4-20 is a large diameter, high capacity bottom pour lead melting pot. This furnace has adjustable lever control of the lead pouring spout. Adjustable remote sensing thermostat keeps lead at the proper temperature. Dust tight thermostat cover increases thermostat life. 4" clearance. Not suited for spinnerbait or molds with wires protruding from top. 110 volt, 700 watts, 20 pound capacity.
    Order #: 410501

    Availability:   
    In Stock
    $81.69 / EACH
  • LEE MAGNUM MELTER
    LEE MAGNUM MELTER
    The Lee Magnum lead melter and a ladle is the best way to pour large sinker, jig and lure molds. The Lee Magnum melter is a 20 lb. capacity melter that raises lead to working temperatures in about 20 minutes. Calibrated thermostat maintains proper lead temperature. The Magnum melter has a 2 year factory warranty. 110 volts, 700 watts.
    Order #: 410507

    Availability:   
    In Stock
    $64.99 / EACH
  • LEE PRECISION MELTER
    LEE PRECISION MELTER
    The Lee Precision melter is a high speed lead melter with an infinite heat control. It takes less than 15 minutes for this furnace to melt 4 pounds of lead. The Precision melter is designed for use with a lead ladle which is not included. 500 watts AC only. 110 Volts. 2 year factory warranty.
    Order #: 410506

    Availability:   
    In Stock
    $34.69 / EACH
  • HOT POT II MELTER
    HOT POT II MELTER
    The Hot Pot II lead ladle melts 4 lb. of lead in 10 minutes. Cast iron body of the lead melter holds heat while the plastic handle prevents burns. Heating element is mounted externally for long life and safety. The Hot Pot II melter includes a stand to protect working surfaces. 120 Volts AC, 500 watts.
    Order #: 450510

    Availability:   
    In Stock
    $39.50 / EACH
  • HOT POT II REPLACEMENT COIL
    HOT POT II REPLACEMENT COIL
    Lead melter replacement coil fits Hot Pot II melters that have externally mounted heating coils. This replacement coil fits our 450510 Hot Pot II lead melter.
    Order #: 450511

    Availability:   
    In Stock
    $18.99 / EACH
  • 5" GATE CUTTERS
    5" GATE CUTTERS
    Gate cutters are to designed remove the lead sprue from your casting quickly and cleanly. Gate cutter jaws are shaped so they cut the extra lead off close to the fishing lure leaving you with a clean jig. Pliers are 5 inches long and have soft cushioned grips. Gate cutter are for cutting lead, NOT for cutting wire. Cutting wire will ruin the gate cutter jaws.
    Order #: 415311

    Availability:   
    In Stock
    $8.39 / EACH
  • 6" HEAVY DUTY GATE CUTTER
    6" HEAVY DUTY GATE CUTTER
    Heavy duty gate cutter is perfect for removing large sprues from lead fishing lure and sinker castings. Do NOT use our gate shears for cutting wire. 6 Inch length.
    Order #: 411241

    Availability:   
    Out of Stock
    $6.95 / EACH