Do-It In Line Sinker Molds
Do-It Molds >> Do-It Sinker Molds >> Trolling Sinker Molds

Do-It Mold's bottom bouncer sinkers let you bounce over obstructions that would snag most other fishing weights. Do-It Keel trolling sinker molds make in-line fishing weights that reduce line twist.

The Do-It in-line trolling sinker molds feature optional line ties. Use brass eyes to reduce cost or insert a crane swivel and B chain for minimal line twist. Select image for more mold information.

DO-IT INT-4-AB IN-LINE SINKER MOLD
Do-It INT-4-AB In Line Trolling Sinker Mold
The Do-It INT-4-AB in-line trolling sinker mold cast a trolling weight with a streamlined shape that slips through the water with minimal resistance. The INT-4-AB mold requires two #1 brass sinker eyes for line ties. Optionally, you can use a # 7 crane swivel and # 1 B chain at either end for less line twist. 4 Cavities - 1/2, 3/4, 1 and 1-1/2 oz. trolling sinkers.
Catalog # 412243
In Stock
$32.69 / EACH Email A Friend
DO-IT INT-3-234B IN-LINE SINKER MOLD
Do-It INT-3-234B In Line Trolling Sinker Mold
The Do-It INT-3-234B in-line trolling sinker mold cast a trolling weight with a streamlined shape that slips through the water with minimal resistance. The INT-4-AB mold requires two #1 brass sinker eyes for line ties. Optionally, you can use a # 5 crane swivel and # 2 B chain at either end for less line twist. 3 Cavities - 2, 3 and 4 oz. trolling sinkers.
Catalog # 412244
In Stock
$32.69 / EACH Email A Friend
DO-IT INT-2-68B IN-LINE SINKER MOLD
Do-It INT-2-68B In Line Trolling Sinker Mold
The Do It INT-2-68B In Line Sinker has a streamlined shape that slips through the water with minimal resistance. The INT-2-68B in line sinker requires two #2 brass sinker eyes. Optionally, you can use a # 1 crane swivel and a # 3 B chain to reduce line twist. This is a 2 cavity mold that makes a 6 oz. and 8 oz. sinker.
Catalog # 412288
Out of Stock
$32.69 / EACH Email A Friend
DO-IT KWC-4-A KEEL SINKER MOLD
Do-It KWC-4-A Keel Trolling Sinker Mold
The keel on the trolling sinker made with the Do-It KWC-4-A Keel Mold is much like a keel on a boat hull. Adding a keel to the in line sinker along with B chain virtually eliminates your line twist. The KWC-4-A uses two size 1 "B-Chain" swivels per sinker. The KWC-4-A is a 4 cavity mold - 3/8, 1/2, 3/8, 1 oz.
Catalog # 410146
In Stock
$32.69 / EACH Email A Friend
DO-IT STR-5-A TROLLING SINKER MOLD
Do-It STR-5-A In Line Trolling Sinker Mold
Do-It STR-5-A in line trolling sinker mold locks crane swivels in at each end of this streamlined in-line trolling sinker to eliminate twisted and kinked fishing lines. Use #7 crane swivel at each end of the weight. The STR-5-A mold has 5 cavities - 1/4, 3/8, 1/2, 5/8, 3/4 oz..
Catalog # 410150
In Stock
$32.69 / EACH Email A Friend
DO-IT STR-4-MED TROLLING SINKER MOLD
Do-It STR-4-MED In Line Trolling Sinker Mold
Do-It STR-4-MED in line trolling sinker mold locks crane swivels in at each end of this streamlined in-line trolling sinker to eliminate twisted and kinked fishing lines. Use size 7 crane swivels at each end of the weight. The STR-4-MED mold has 4 cavities - 3/4, 1, 1-1/2 and 2 oz..
Catalog # 410151
In Stock
$32.69 / EACH Email A Friend
DO-IT BTM-5-M BOTTOM BOUNCER SINKER MOLD
Do-It BTM-5-M Bottom Bouncer Mold
The Do-It BTM-5-M bottom bouncer sinker lets you bounce over obstructions that would snag most other sinkers. The slender shape of the lead body and wire extending through it permits the Bottom Bouncer sinker to bump and bounce over obstructions. The bait and hook trail safely above and behind as the stainless steel wire springs over rocks. BTM-5-A mold has 5 cavities, 1/2, 3/4, 1, 1-1/2 and 2 oz. sizes. Use .035" wire to form your own wire shaft or our 325925(WBB35) prebent shaft.
Catalog # 410172
In Stock
$32.69 / EACH Email A Friend
More