Rod Building >> Handle, Grip Material >> EVA Foam Grips

Our EVA foam grips for fishing rod handles are some of the best in the fishing rod industry. EVA foam material is dense, durable and comfortable. These grips can be used for replacing old worn out rod handles and for building new custom fishing rods. If desired, foregrips can be shaped using coarse sandpaper and a lathe. Black color.

SHAPED FOAM BUTT CAP #D
EVA Foam Butt Cap, 3/4" I.D.
This EVA foam butt cap was designed for use with our 260-762 foregrip/butt cap to assemble split grips. It can certainly be used in other applications where a 3/4" I.D. buttcap is called for. Premium black dense EVA foam.
Catalog # 260704
In Stock
$0.79 / EACH Email A Friend
SPLIT GRIP FOREGRIP/BUTT
Premium EVA Foam Split Grip Foregrip, Buttgrip
This grip can be used to assemble split grip fishing rod handles. It can be used as a foregrip if desired and it can also be used to construct the butt portion of the split grip. It is shaped to accept any 3/4" I.D. butt cap if you're using it as a butt grip. Made with the same dense black EVA foam found on high end Japanese split-grip rods. All grips have a 1/4" I.D..
Catalog # 260762
In Stock
$1.19 / EACH Email A Friend
SPLIT GRIP REAR GRIP
Fishing Rod Split Handle Rear Grip, Premium EVA Foam
This rear grip is made with the same dense black EVA foam found on high end Japanese split-grip rods. Available in 1/4" I.D. only. Grip is shaped to fit trigger reel seats. Remove insert portion of the grip to make it fit flush on spinning rods.
Catalog # 260763
In Stock
$1.29 / EACH Email A Friend
FUJI KSK FOAM REAR OR FORE GRIP
Fuji EVA Fishing Rod Grip, Fits KSK Reel Seats
This Fuji EVA foam grip is made to be assembled with the KSK split handle spinning and casting reel seats. Designed to fit the moving nut portion of the KSK seat whether it's a casting or a spinning reel seat. Use as a rear grip on the KSK spinning reel seat and as a foregrip on the KSK trigger casting reel seat. Meets the high standard set in Japan for EVA foam grips. SPECS: 1/4" I.D., 1-7/8" Length. Image is for illustration, barrel and nut not included.
Catalog # 230410
In Stock
$1.99 / EACH Email A Friend
FUJI KSK FOAM SPLIT REAR GRIP
Fuji KSK EVA Foam Rear Grip for Casting Rods
Fuji EVA grip used on KSK casting rod reel seats as a rear grip. Grip is stepped down to fit into trigger hood. SPECS: 1/4” ID., 3-1/2” full length. The grip can be reamed out to about .400”.
Catalog # 230411
Out of Stock
$2.49 / EACH Email A Friend
FUJI KSK FOAM SPLIT BUTT GRIP
Fuji KSK EVA Foam Butt End Grips
Fuji EVA foam butt end for the KSK split grip reel seats. Use this butt end with both casting and spinning rods. Made with top quality, dense EVA foam. SPECS: 1/4” ID., 1-5/8” long.
Catalog # 230412
Out of Stock
$2.09 / EACH Email A Friend